Open :
Monday to Friday
Hours :
7:30 am - 5:00 pm
Call us :
1-877-962-9110
26180 - 114 Avenue
Acheson, AB T7X 6R1
Acheson, AB T7X 6R1
Canuck Tridem Side Dump
You can’t beat the durability of the Canuck side dump trailer. The box is constructed from 400-500 brinell strength steel which is extremely wear and crack resistant, giving you a long life cycle. The unique cylinder design means faster dump cycles and lower weight and maintenance costs.
Trailer Features
Frame
We use a 110,000 psi tensile frame flange and webb, while the majority of other manufacturers only use high tensile flanges.
Unique Cylinder
A single cylinder is mounted under the box in the center means faster dump cycles and lower weight and maintenance costs.
Box Strength
The Canuck box is constructed from 400-500 brinell strength steel which is extremely wear and crack resistant, giving you a long life cycle.
Dump Angle
The rolled box combined with a steep side dump angle ensures optimum clean out.
Latch
Comes equipped with a quick change manual latch system for dumping curb or street side.
Side Controls
Side controls located on the main frame allow ground crew to manually dump the box when needed.
| Model | SD-3500 |
| Width | 8'6" |
| Overall Length | 39'5" with push block |
| Overall Height | 103" (top of sidewall) |
| Kingpin Height | 50" |
| Side Dump Capacity | 22.5 cu. yd. water level & 26 cu. yd. heaped |
| Box | Radius style box design, Brinell 450, 3/16” 205ksi high tensile steel for strength & wear resistance, Large formed top beams with triple external hopper support rings, Bottom drains at front and rear of hopper, Twin tipping hinge assemblies per side & grease style bushings |
| Frame | Main frame rails constructed from QT-100, 100,000psi steel, Engineered flared end I beam crossmembers, High tensile 3/8” steel upper coupler plate assembly, Rear mounted push block & under ride bumper, Two speed landing gear with 62,500lb lift capacity, Quick change manual hatch system for dumping curb or street side |
| Hoist | Single center mounted double acting 8.5” hydraulic tipping cylinder |
| Hydraulics | Dual line system with high pressure supply & low-pressure return, Supply & return quick couplers on front trailer, Air over electric hydraulic control valves c/w manual overrides |
| Suspension | Hendrickson Intraax 75,000lb air ride suspension |
| Axles | (3) 25,000lb axles @ 77.5” track (8’6” over tires) |
| Brakes | 16 ½” x 7” Q-plus quick-change brakes & enclosed S camshafts, Automatic slack adjusters & parking brakes on all axles, Parallel axle bearing system & Stemco HP seals, Meritor/WABCO 2S/1M ABS |
| Hubs & Drums | 10 stud steel piloted parallel hubs & outboard cast drums |
| Wheels | 10 stud pilot mounted 8.25 x 24.5 steel disc wheels – silver |
| Tires | 11R-24.5 16 ply tires |
| Electrical System | Dual electric / manual air dump & liquid filled weigh gauge, LED rubber mounted sealed beam lamps, Integrated wiring harness system, Stop, turn, tail & ID lights are installed in rear of chassis, Clearance lights at front & rear corners & midway turn signal lights mounted in frame |
| Fenders | Formed aluminum checker fender & steel brackets on gooseneck, Plastic tub style fenders over rear tires |
| Mudflaps | Standard equipped full mud flap package |
| Load Cover | Electric driven load cover c/w PVC solid tarp |
| Finish | Sandblasted, primed, and painted with PPG urethane paint, Sideboards to match trailer chassis, Document holder installed on frame side rail |
| Safety Tape | Applied as per regulations |
| Warranty | (5) years on main frame rails & (3) years on crossmembers & framing, (1) year on all other parts manufactured for Canuck |
- Tridrive tractor compatible
- Quick-Slide UHMW box liners liners (+)
- Tuff-Lift axle lift system (+)
- Aluminum wheels, lightweight hubs and Centri-Fuse drums
- Aluminum toolbox on frame
- Spare tire carrier with spare tire
There are no videos at this time.
To view our inventory of in stock and on order side dumps, click the button below.