fbpx

Load Line Cross Gate Belly Dump Trailer

Load-Line-Cross-Gate-Belly-Dump-Trailer-Main-Image

Load Line Cross Gate Dump Trailer

The Load Line Crossgate Belly Dump Trailer is a reliable and affordable option for any user. Fast acting close under load gates with adjustable gate stops control spread and the slope of the hopper is optimum for material cleanout. With many options available, you can customize this trailer to fit your specific needs.

Call for Pricing

1-877-962-9110

Trailer Features

Gate Opening

Bottom dump cross gate; fast acting close under load gates with adjustable gate stops for controlled spread.

Optimum Slope

Optimum hopper slope for better material cleanout.

Open Frame

Our open frame design in the front and rear, reduces weight and drag increasing payload and profit.

Width 8'6"
Length 39'9"
Model GCDSP-38
Overall Height Top of sideboards: 9’9” unladen
Hopper Load Area 94” W x 219” L
Bottom Hopper Opening 22” x 94”
Gate Ground Clearance 22"
Capacity 26.9 cu. yd
Axle Spacing 60"
Frame 6” x 4” Rectangular tube perimeter frame, Manufactured high tensile I beam sub frame over suspension, Engineered formed high tensile channel crossmembers, Diffuser plates & gussets located to support & relieve stress
Upper Coupler Rubber bushing, side oscillating upper fifth wheel plates c/w 2” kingpin
Hopper High tensile 55w-1/8” formed convex sidewall, High tensile 50w-1/8”-54°upper & lower slope, High tensile formed gate panels & formed horizontal stiffeners panels, 2” x 6” Spruce finished sideboards
Gates Composite 8” x 24” double acting air cylinders & quick return valves, Harden gate hinge pins, Macc electric over air solenoid gate control valve, Bimba lubricator & filter units located in aluminum side cabinet, Par36 utility heat lamp installed in oiler cabinet & grease type hinge bushings, Adjustable gate spread selection @ 2” increments, Par36 utility heat lamp installed in oiler cabinet
Push Block Bolt on push block mounted on rear apron
Landing Gear Lightweight drop tube dolly legs, pin type height adjustment
Rock Shields Rock shield installed on front side of 1st axle suspension
Suspension (3) 23,000 lb. air ride suspension @ 60” spacing, Dual electric/manual air dump solenoid & liquid filled weigh gauge
Axles (3) 25,000 lb. axles @ 77.5” track, Tapered axle bearing system & Stemco HP seals
Brakes 16 ½” x 7” Q Plus brake shoes enclosed camshafts, Automatic slack adjusters, Type 30/30 brake chambers, top axle mount with pushrods to rear
Hubs & Drums 10 stud steel piloted hubs & cast steel drums
Wheels 10 stud pilot mount steel 24.5 x 8.25 disc- White
Tires 11R-24.5 radial 16 ply
Electrical System Integrated harness system LED rubber mounted sealed beam, Rear red oval tail/stop/turn lights, (3) Rear 2” center ID with front & rear corner 2” marker lights, (1) Midway amber turn/clearance light per side
Fenders Aluminum sloped fenders inside & outside neck areas & over all tires
Mudflaps Standard equipped full mud flap package
Load Cover Michel’s Dura-Flip c/w manual chain drive winder
Finish Sandblasted, epoxy primer & Axalta urethane paint, Sideboards painted with Axalta urethane paint, Single 4” & double 1” vinyl body stripe
Safety Tape Applied as per regulations
Warranty (5) year Prorated on structural components built by Loadline, (1) year on non-structural components built by Loadline
  • Available in other axle configurations
  • Tuff-Lift axle lift system (+)
  • 32 cu. yd. hopper in lieu of 25.5 cu. yd.
  • Tri-drive tractor compatible
  • Tridrive tractor compatible
  • 2 speed landing gear
  • Aluminum wheels, lightweight hubs, and Centri-Fuse drums
  • Accu-Tarp retractable PVC load cover

There are no videos at this time.

To view our inventory of in stock and on order belly dumps, click the button below.

    Customize this trailer to suit your exact needs

    Tell us a bit about what you’re looking for and one of our sales representatives will be in touch with a quote.

    First Name*

    Last Name*

    Phone Number*

    Email Address*

    Which trailer are you interested in?

    Model*

    Your Message