Load Line Quad Cross Gate Wagon

Load Line Quad Cross Gate Wagon

Experience the convenience of spreading material with a bottom dump trailer while pulling it behind your dump truck with the Load Line Quad Cross Gate Wagon.


Well Equipped from $68,990

Financing Available

Click Here for Info


Load Line Quad Cross Gate Wagon Gates

Gate Opening

Bottom dump cross gate; fast acting close under load gates with adjustable gate stops for controlled spread.

Load Line Trailers Quad Cross Gate Wagon Gate Opening


Heavy duty Holland turntable bearing.

Load Line Quad Cross Gate Wagon Turntable

Open Frame

Our open frame design in the front and rear, reduces weight and drag increasing payload and profit.


Model LL28-QWCD
Length 43'1"
Width 8'6"
Overall Height Top of sideboards: 112.5" unladen
Target Load Area 94"W x 219"L
Bottom Hopper Opening 22" x 94"
Gate Ground Clearance 22"
Capacity Level full 23.4 cu. yd.
Heaped 24.9 cu. yd.
Axle Spread 50"
Frame Fabricated wide flange I beam mail rails on front dolly
Fabricated wide flange I beam main rails on rear suspension
Formed lightweight engineered cross members
Diffuser plates & gussets located where required to support & relieve stress
Turntable Holland HD 39" grease tube turntable bearing
 Hitch Square tube style draw bar c/w rubber bushed pivot hinges
Premier heavy duty low profile pintle eye
Lightweight swivel jack & spring assisted draw bar lift
(2) 3-ton safety hooks @ 1/2" safety chains
Hopper High tensile 1/8" formed convex sidewall
High tensile 1/8"-55 degree upper & lower slope panels
Aluminum walking deck and ladder in front of hopper
Calcium sprayer tank c/w nozzle and hose assembly at front
2" x 8" spruce sideboards
Gates High tensile formed gate panels & formed horizontal stiffeners
Composite 8" x 24" double acting air cylinders & quick return valves
Harden gate hinge pins & grease type hinge bushings
Adjustable gate spread selection @ 2" increments
60g reservoir c/w shut off valve & safety check valve
Macc electric over air solenoid gate control valve
Bimba lubricator & filter units located in aluminum side cabinet
Par36 utility heat lamp installed in oiler cabinet
Fenders (4) Plastic tub style fenders over dolly tires
Aluminum sloped fenders inside & outside neck & rear tires areas
Bumper  Heavy duty 4” x 4” tubing bumper and uprights
Landing Gear 5000lb swivel crank down dolly leg mounted on A frame hitch
Rock Shields Heavy duty rock shield installed on front side of suspension
Suspension 23,000 lb. air ride
Dual electric/manual air dump & liquid filled weigh gauge
Axles (3) 25,000 lb. axles @ 77.5” track (8’6” over tires)
Brakes Automatic slack adjusters
Meritor/WABCO 2S/1M ABS
Brake Linings
16 1/2" x 7" Q-plus quick-change brakes c/w enclosed camshafts
Bearings & Seals Tapered axle bearing system & Stemco HP seals
Hubs & Drums 10 stud steel piloted hubs & outboard cast drums
Wheels (16) Aluminum 10 stud pilot mount 24.5 x 8.25 disc - machined
Tires 11R-24.5 on/off road tires
Electrical System Integrated harness system
LED rubber mounted sealed beam
Midway turn signal on each side of trailer
7 & 6 male plugs at front hitch with cords routed in hitch tubing
(4) Rear red oval tail/stop/turn lights
(3) Rear 2" center ID with front & rear corner 2" marker lights
Mudflaps Standard equipped full mud flap package
Load Cover Michel’s Dura-flip mesh load cover c/w electric drive winder
Finish Sandblasted, epoxy primer & Axalta urethane paint
Sideboards painted with Axalta urethane paint
Single 4” & double 1” black body stripe
Safety Tape Applied as per regulations
Warranty: 5 year pro-rated warranty on structural components manufactured by Loadline
1 year warranty on non-structural components manufactured by Loadline
  • Tuff-Lift axle lift system
  • Aluminum wheels, lightweight hubs, and Centri-Fuse drums
  • Michel's flip or retractable load cover
  • Electric drive load covers
  • Load slide control electric hopper vibrators
  • Plastic UHMW easy dump hopper liners



There are no videos at this time.

Search our Inventory